Call Toll Free 1-800-823-6677

Measuring & Installation Instructions
Window Screens

Step 1
Roll screen installation is usually completed inside window and door frames. We simply need the width and height dimension to within an 1/8" of the opening you plan to install the rolls screen in. The required depth to install the roll screen i is 1-1/2" or more. These measurements should be made at several locations of both width and height and the smallest measurement should be used.

If you don't have adequate depth to mount inside of the window jamb, we can provide an outside mount application. We still need the same width and height of the opening. We will produce the screen 4" wider and 3" higher then the dimensions you provide. This will insure proper space for mounting on the surface around your window.
Step 2

Note: if you order a kit, please refer to the first 8 steps of the door kit installation quide.
Secure to Wall ... Attach the right end cap to the top right side of the window jamb. You may recess the screen as far as you want into the window jamb. However, most installations are placed at the outside edge of the jamb as shown.
Step 4 Step 5
Secure to Wall ... Attach the left end cap to the top left side of the window jamb. You may recess the screen as far as you want into the window jamb. If you do recess the end cap, make sure the right and left end caps are the same depth. However, most installations are placed at the outside edge of the jamb as shown.
Secure to Side Pieces ... Open both side pieces (unclip), introduce the box onto the side pieces and clip them.
Step 6 Step 7
Assemble Guide Base ... By pressure, insert the guide base with conical shape screw onto the lower end of the guides; please keep in mind that the outer brush should be fixed to the lateral side of the wall
Install Guides ... Introduce the upper part of the guides into the end with projects from the telescopic side piece.
Step 7 Step 8
Secure Guides ... Screw the guides to the wall by using the orientation device.
Regulate Screw ... Regulate the conical guide screw in such a manner that its cavities perfectly match with the bottom base o the box (aluminum end), so that the locking system is secured.

Attention

To work well, the screen must be fixed at perfect right angle to the wall.

Call (800) 823-6677 to speak with a Retractable Screen Specialist.